The Process Of Making Steel

Steel is one of the most frequent kinds of metal used by millions of people globally. In case you’ve always wondered how it is made here is advice to guide you though. It is important that you are aware that the whole process involves three steps: the conversion of the raw steel to a usable form, the formation of this steel in a continuous or semi-continuous production line, and the cutting and alteration of the steel to match the requirements of the customer.

Conversion of the raw steel

This is also referred to as the ingot production. This wrought steel is made by heating coke and iron ore in a furnace. Carbon is then removed by pumping a great deal of oxygen to the liquid. The molten steel is then poured into thick wrought iron molds where it warms into ingots. To form flat goods such as sheets and plates, the metals are formed between big rollers under high pressure.

Bloom making

To create blooms, ingots are passed through a set of grooved steel rollers which are usually stacked. Before the blossoms are made into pipes, they are processed further. They’re converted to billets by being put through more rolling apparatus that are narrow and long. This procedure allows sufficient cuts without quitting the production procedure. Once they are finished, the billets are piled and become smooth pipes.

Image result for stainless steel

Pipe making

Billets and skelp are utilized to make steel pipes. Since the spool of steel is unwound, it is heated and passed through a series of grooved rollers. As it moves, the rollers cause the edges of the skelp to curl together forming an unwedded pipe. Following this, the production firm passes welding electrodes sealing both ends of the pipes together.

If you want to explore more about ‘steel pipe with seam and seamless steel pipe‘ (which is also known as’ท่อเหล็กมีตะเข็บ และ ท่อเหล็กไม่มีตะเข็บ‘in the Thai language) then you can visit online websites.

The welded seam is then passed through a high-pressure roller which leads to the creation of a tighter weld. The professionals cut the pipes into various sizes and stacked for additional processing.

Final processing

Here the pipes are placed via a washing machine. Additionally, it is common for them to be fitted with joints linking a couple of pieces of pipes. The pipes can be combined using several kinds of joints, but the most common is that the threading joint. Here tight grooves are cut into the end of the pipe. When the procedure if over the pipes are coated with a light coating of oil.